Notices
General Boating Discussion

496 Chirps WTF

Thread Tools
 
Old 03-02-2008 | 05:00 PM
  #1  
Thread Starter
Registered
 
Joined: Oct 2001
Posts: 1,124
Likes: 0
From: Tampa,Fl.
Default 496 Chirps WTF

Receving fast chirps from the alarm sounder when the ignition key is turned. The first time the ignition is turned on the chrips are momentary and then you can hear the fule pump prime and chrips stop. If you turn the key off and back on again the chirps persist and you can hear two relays on the clacking on top of the engine.

[YOUTUBE]http://www.youtube.com/watch?v=vIsAFtK2r0I[/YOUTUBE]

Last edited by Donzi Corleone; 03-02-2008 at 07:03 PM. Reason: utube clip wasn't working
Donzi Corleone is offline  
Reply
Old 03-02-2008 | 10:06 PM
  #2  
Griff's Avatar
Charter Member # 55
25 Year Member
Charter Member
Super Moderators
 
Joined: Oct 2000
Posts: 20,232
Likes: 2,482
From: Omaha/LOTO
Default

If they stop when you start it, its normal. Its more than likely the low oil pressure alarm. The key on activates all the electrical, including the sensors, and since its not running, there is no oil pressure and the alarm sounds.
Griff is offline  
Reply
Old 03-03-2008 | 06:37 AM
  #3  
Pwrbt33's Avatar
Gold Member
 
Joined: Jan 2001
Posts: 2,123
Likes: 1
From: Brooklyn Park, Md USA
Default

It almost sounds like a loose connection. I have had a boat in the past that did that when the cable was loose on the starter. Let us know what you find out. You should get a 2 to 3 second steady alarm and you should hear the relay click on the engine and then it should stop, upon key up. The steady alarm doesnt seem right at all.
Pwrbt33 is offline  
Reply
Old 03-03-2008 | 08:05 PM
  #4  
Thread Starter
Registered
 
Joined: Oct 2001
Posts: 1,124
Likes: 0
From: Tampa,Fl.
Default

The problem is intermetint, after a few turns you might get the 1 beep and it will start right up. It will fire after several attemps are made. Almost like it resets itself.
Donzi Corleone is offline  
Reply
Old 03-03-2008 | 08:12 PM
  #5  
Lauderdaleboats's Avatar
Registered
 
Joined: May 2005
Posts: 409
Likes: 1
From: Florida
Default

Pull the canon plug and push it back on. Loose connection. Very common.
Lauderdaleboats is offline  
Reply
Old 03-03-2008 | 08:37 PM
  #6  
Thread Starter
Registered
 
Joined: Oct 2001
Posts: 1,124
Likes: 0
From: Tampa,Fl.
Default

Is it the round plug thats an inch and half around the back side of the motor?
Donzi Corleone is offline  
Reply
Old 03-03-2008 | 08:45 PM
  #7  
Lauderdaleboats's Avatar
Registered
 
Joined: May 2005
Posts: 409
Likes: 1
From: Florida
Default

That's it.
Lauderdaleboats is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TeamPSI
General Q & A
23
12-10-2007 05:23 PM
apexer
General Q & A
11
07-20-2007 07:24 PM
westcoaster
General Q & A
3
08-08-2005 11:24 AM
bn
General Q & A
4
01-15-2005 07:40 AM
NVRENOUGH
General Q & A
3
02-18-2002 12:25 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.