Fountain 27 Prop needed
05-11-2008 | 09:57 PM
#1
Thread Starter
Registered
Joined: Jan 2008
Posts: 2,357
Likes: 2
From: San Diego
Fountain 27 Prop needed
I have a 1.5 bravo , a supercharged 502 and a 15X 25
Machsterndriver 4 blade that has a rough (chippd up ) cutting edge. Only 75 on GPS at 5200 RPM's.
Plenty of right now out of the hole. Out of the hole like "RIGHT NOW" but it seems to have 0 bow lift. I have to trim to # 5-6 to get it up out of the water at all..Anything over # 6 trim and it gets slower. And No rooster tail .
Any prop suggestions??It's a 92 non stepped
Machsterndriver 4 blade that has a rough (chippd up ) cutting edge. Only 75 on GPS at 5200 RPM's.
Plenty of right now out of the hole. Out of the hole like "RIGHT NOW" but it seems to have 0 bow lift. I have to trim to # 5-6 to get it up out of the water at all..Anything over # 6 trim and it gets slower. And No rooster tail .
Any prop suggestions??It's a 92 non stepped
05-11-2008 | 10:43 PM
#2
Registered
Joined: Jan 2007
Posts: 1,667
Likes: 0
I have a 1.5 bravo , a supercharged 502 and a 15X 25
Machsterndriver 4 blade that has a rough (chippd up ) cutting edge. Only 75 on GPS at 5200 RPM's.
Plenty of right now out of the hole. Out of the hole like "RIGHT NOW" but it seems to have 0 bow lift. I have to trim to # 5-6 to get it up out of the water at all..Anything over # 6 trim and it gets slower. And No rooster tail .
Any prop suggestions??It's a 92 non stepped
Machsterndriver 4 blade that has a rough (chippd up ) cutting edge. Only 75 on GPS at 5200 RPM's.
Plenty of right now out of the hole. Out of the hole like "RIGHT NOW" but it seems to have 0 bow lift. I have to trim to # 5-6 to get it up out of the water at all..Anything over # 6 trim and it gets slower. And No rooster tail .
Any prop suggestions??It's a 92 non stepped
Cheers!!
