Weight of a 39 MTI and trailer?
06-19-2008 | 06:46 PM
#1
Thread Starter
Registered
Joined: Jun 2001
Posts: 2,303
Likes: 109
From: McHenry, Illinois
Weight of a 39 MTI and trailer?
Illinois is giving a lot tickets for over weight trailers not plated properly. Any idea what a 39 MTI full of gas with Six drives and an aluminum Myco trailer would weigh?
06-19-2008 | 07:46 PM
#3
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
[QUOTE=40FlatDeck;2595551]Well it's not an MTI, but my 40 Skater was 9800 when it was picked up by the crane. My trailer MSO says 3400...
Brad
Well it's not an MTI, but our 40 Skater just weighed in at 9740 lbs full of fuel
That Randy guy in Wentzville may know your MTI 4 sure .... Keep them boyz busy up there so they leave us the phuch alone
ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Brad
Well it's not an MTI, but our 40 Skater just weighed in at 9740 lbs full of fuel
That Randy guy in Wentzville may know your MTI 4 sure .... Keep them boyz busy up there so they leave us the phuch aloneITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
06-20-2008 | 12:38 PM
#4
Thread Starter
Registered
Joined: Jun 2001
Posts: 2,303
Likes: 109
From: McHenry, Illinois
Thank you to the "Skater" owners. MTI guys are sleeping. LOL I was also told the boat rigged is about 8500 and full of gas should put it close to 10,000. Trailer I am guessing 2500. So a 14,000 trailer plate should be good. I just realized my plates are only 10,000 oops....
06-23-2008 | 06:27 PM
#5
Registered
Joined: Jun 2006
Posts: 145
Likes: 0
From: Kansas City, KS
I would take it to the scales and get a definite weight. Weigh just the truck, then go back with the boat and trailer. I want to say ours is 12,500 boat and trailer, but it's an all carbon boat. MTI could answer you best without weighing it yourself.
06-23-2009 | 08:01 AM
#7
Registered User
Joined: Jan 2003
Posts: 884
Likes: 3
From: Danvers, Mass
What size fuel tank's ? I know you asked about the 39' but the 44' I run has big tanks (low on fuel)on a triple axel myco was over 13000 lbs. Jo
Last edited by Joe Todesca; 06-23-2009 at 11:20 AM.
06-24-2009 | 08:54 AM
#9
Registered
Joined: May 2003
Posts: 3,133
Likes: 2
From: E-Dock
Brad, just guessing I would say your a little light on all wts. I think 8500 is a minimum for the race boats, with the conversions and paint you've done probably a little heavier, Trailer will be a little heavier for sure. Just take it to the scales, run the whole rig through, then unhook and run your truck through and do the math.
I know my Heritage is heavier than a Myco and my Boat is heavier, but last time I weighted them in was like 15,700 with half a tank.
I know my Heritage is heavier than a Myco and my Boat is heavier, but last time I weighted them in was like 15,700 with half a tank.
06-24-2009 | 10:24 AM
#10
Registered
Joined: Sep 2001
Posts: 3,249
Likes: 2
From: St. Louis
Brad, just guessing I would say your a little light on all wts. I think 8500 is a minimum for the race boats, with the conversions and paint you've done probably a little heavier, Trailer will be a little heavier for sure. Just take it to the scales, run the whole rig through, then unhook and run your truck through and do the math.
I know my Heritage is heavier than a Myco and my Boat is heavier, but last time I weighted them in was like 15,700 with half a tank.
I know my Heritage is heavier than a Myco and my Boat is heavier, but last time I weighted them in was like 15,700 with half a tank.
