Sawzall again MTI
09-08-2008 | 08:17 PM
#4
Charter Member #1171
Joined: Feb 2001
Posts: 4,018
Likes: 21
From: Clearwater, FL
09-08-2008 | 09:09 PM
#5
VIP Member
Joined: Apr 2001
Posts: 4,213
Likes: 0
From: Chicago il
I guess it's not for sale anymore ???
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
09-08-2008 | 10:43 PM
#6
Thread Starter
Registered
Joined: Jun 2001
Posts: 2,303
Likes: 109
From: McHenry, Illinois
I wanted a new boat. This will keep me from getting bored with the boat for a while. After I made the cut it dawned on me that maybe it would fit in the garage at home. It does by fit by just 1/2". I was 12" too tall before, not including the scoop.
Notice the escape hatch in the floor is glassed in. That took me a full day. Balsa core was needed to raise the floor area over the hatch. I discovered the hull and the deck are carbon fiber/epoxy construction. Light weight and expensive. No more seat belts either. Going to be a full on pleasure boat. Thinking about pulling power out of the engines as well by lowering boost.
Notice the escape hatch in the floor is glassed in. That took me a full day. Balsa core was needed to raise the floor area over the hatch. I discovered the hull and the deck are carbon fiber/epoxy construction. Light weight and expensive. No more seat belts either. Going to be a full on pleasure boat. Thinking about pulling power out of the engines as well by lowering boost.
Last edited by Brad Zastrow; 09-08-2008 at 11:07 PM.
