Polished IMCO lower 1.25 shaft, 1.5 ratio...
09-15-2008 | 02:19 PM
#1
Thread Starter
Registered User
Joined: Feb 2007
Posts: 356
Likes: 0
From: CDA, ID
Polished IMCO lower 1.25 shaft, 1.5 ratio...
I've got a polished IMCO lower w/a nose cone and lwp with roughly 20 hours on it (new this year, mid may). 1.25" prop shaft, 1.5 gear ratio.
I'm looking to trade for a satin unit with the same size shaft only in a -1 or -2.
If you have or know of someone, let me know.
I'm looking to trade for a satin unit with the same size shaft only in a -1 or -2.
If you have or know of someone, let me know.
01-10-2009 | 10:43 PM
#3
Registered
Joined: Jan 2008
Posts: 70
Likes: 0
I have got a -2 IMCO lower that has just been rebuilt. Big shaft. IMCO vertical shaft. Billet bearings. It is satin finish. My drive is a little too high and if your drive is a standard lower I would be glad to talk to you about a trade.
01-10-2009 | 10:51 PM
#4
Registered
Joined: Sep 2006
Posts: 26
Likes: 0
From: Seattle, WA
