The best conventional 40wt I can find.
09-17-2008 | 05:13 PM
#1
Thread Starter
Gold Member
Joined: May 2004
Posts: 5,762
Likes: 1
The best conventional 40wt I can find.
Brad Penn 40wt.
http://www.bradpennracing.com/Products/SAE40.html
Al 0
Cr 0
Fe 1
Cu 0
Pb 0
Tn 0
Mo 1
Ni 0
Mn 0
S 0
Ti 0
K 1
Bo 3
Si 8
Na 241
Ca 1634
Mg 582
Ph 1350
Zn 1595
Ba 1
SUS Viscosity@210*F 78.1
cSt Viscosity@100*C15.05
Flashpoint in *F 430
Loaded with anti-wear ZDDP.
http://www.bradpennracing.com/Products/SAE40.html
Al 0
Cr 0
Fe 1
Cu 0
Pb 0
Tn 0
Mo 1
Ni 0
Mn 0
S 0
Ti 0
K 1
Bo 3
Si 8
Na 241
Ca 1634
Mg 582
Ph 1350
Zn 1595
Ba 1
SUS Viscosity@210*F 78.1
cSt Viscosity@100*C15.05
Flashpoint in *F 430
Loaded with anti-wear ZDDP.
Last edited by Hydrocruiser; 09-17-2008 at 05:49 PM.
09-18-2008 | 05:07 AM
#3
Off the Radar
Joined: May 2001
Posts: 1,097
Likes: 1
From: Cape Coral, FL or Colonial Beach, VA
I have had excellent luck with 40W Valvoline racing oil. I have taken numerous motors apart after running & the were in good of shape as there were with Mobil 1. A lot less costly
