Rocker arm geometry
10-04-2008 | 09:15 AM
#1
Thread Starter
Registered
Joined: Mar 2007
Posts: 285
Likes: 0
From: Toms River, New Jersey
Rocker arm geometry
Checking rocker arm geometry should the rocker roll acoss the top of the valve or shoud it stay in the center of the valve stem keeping it as norrow as possible?.
10-04-2008 | 09:53 AM
#2
Off the Radar
Joined: May 2001
Posts: 1,097
Likes: 1
From: Cape Coral, FL or Colonial Beach, VA
Across the center of the stem.
Take a black sharpy and color the top. Turn over the motor a couple of times and remove the rocker. Should be a place in the center of the stem about 1/8" where the marker is removed.
Take a black sharpy and color the top. Turn over the motor a couple of times and remove the rocker. Should be a place in the center of the stem about 1/8" where the marker is removed.
