454 Mag cam
04-14-2009 | 08:31 AM
#1
Thread Starter
Registered
Joined: Mar 2009
Posts: 95
Likes: 0
From: Merritt Island FL
454 Mag cam
Have a base 310 or 330 454 in a 22 foot Powerquest. looking at sliding in a 454 Mag roller cam 224@50 & 483 lift. Any power to be had with that change. Using aluminum intake.
04-14-2009 | 11:32 AM
#2
VIP Member
Joined: Oct 2002
Posts: 5,246
Likes: 3
From: Ivoryton, CT
Yes, that is worth 20-30 HP...
If you have a Gen VI roller cam 310HP to start, it will be an easy swap.
Putting a Gen VI cam into a Gen IV or Gen V 330HP will require a different timing set and cover, aswell as lifters at min.
If you have a Gen VI roller cam 310HP to start, it will be an easy swap.
Putting a Gen VI cam into a Gen IV or Gen V 330HP will require a different timing set and cover, aswell as lifters at min.
__________________
Patrick
Patrick
