Go Back  Offshoreonly.com > Technical > General Q & A
Cigarette TG- List your Setup and Speed >

Cigarette TG- List your Setup and Speed

Notices

Cigarette TG- List your Setup and Speed

Thread Tools
 
Old 10-30-2009 | 01:41 PM
  #1  
Thread Starter
Registered
 
Joined: Oct 2009
Posts: 658
Likes: 0
From: Splendora, TX
Cigarette TG- List your Setup and Speed

I am doing some reasearch on other Cigarette TG owners setup and performance.
Please list the following:

Year and Boat
Flat Bottom or Step
HP
DRIVE
Drive Ratio
Prop
Pitch
Lab Finished or Non-Labbed.
Speed


Here is my setup

1994 Cigarette Top Gun
Flat Bottom
Twin 610hp
Bravo 1
1.5 gear ratio
28 Pitch Maximus Prop
Non-Labbed
Top Speed - 68mph
UrbanDisturbance is offline  
Reply
Old 10-30-2009 | 02:05 PM
  #2  
RMPRam's Avatar
Platinum Member
25 Year Member
Platinum Member
 
Joined: Oct 2000
Posts: 1,054
Likes: 29
From: Santa Barbara CA. USA
Default

1984 Flat Deck
Flat bottom w/notch
twin 1100hp.
#3A or #5
1.5 ratio
18x32 4bbl.
non-labbed
90-92 w/3A's and 100-102 w/#5"s and box's
RMPRam is offline  
Reply
Old 11-05-2009 | 06:16 PM
  #3  
4195's Avatar
Can You Hear Me Now??
20 Year Member
Gold Member
 
Joined: May 2005
Posts: 2,757
Likes: 96
From: Old Saybrook CT
Default

Okay I see you not gotten a lot of responses but your speed seems way off.
I have a 93 Cafe
I am running twin 550hp
1.5 ratio
26p 4 blades(labbed by BBlades)
Top speed 1/2 tank of fuel 2 guys and a good chop 78.9gps
Boat runs a consistent 75-76mph
4195 is offline  
Reply
Old 11-05-2009 | 07:17 PM
  #4  
vette131's Avatar
Registered
 
Joined: Dec 2003
Posts: 1,113
Likes: 0
From: Slidell,La
Default

Originally Posted by UrbanDisturbance
I am doing some reasearch on other Cigarette TG owners setup and performance.
Please list the following:

Year and Boat
Flat Bottom or Step
HP
DRIVE
Drive Ratio
Prop
Pitch
Lab Finished or Non-Labbed.
Speed


Here is my setup

1994 Cigarette Top Gun
Flat Bottom
Twin 610hp
Bravo 1
1.5 gear ratio
28 Pitch Maximus Prop
Non-Labbed
Top Speed - 68mph
what rpm's ? 28 maximus not a great match for your combo imho
vette131 is offline  
Reply
Old 11-05-2009 | 07:27 PM
  #5  
4195's Avatar
Can You Hear Me Now??
20 Year Member
Gold Member
 
Joined: May 2005
Posts: 2,757
Likes: 96
From: Old Saybrook CT
Default

Originally Posted by vette131
what rpm's ? 28 maximus not a great match for your combo imho
Yeah I agree something is wrong you should be seeing speeds 75 +
What rpms are you seeing?
4195 is offline  
Reply
Old 11-05-2009 | 07:46 PM
  #6  
seafordguy's Avatar
Gold Member
15 Year Member
Gold Member
 
Joined: Jun 2006
Posts: 5,117
Likes: 959
From: Seaford, VA
Default

1990 Cafe
Blown 502's with ROUGHLY 580-600 HP (I guess closer to 580)
Imco (Bravo's)
4 Blade 26's
Probably a 75 MPH boat
I have seen 73 without staying in it very long, and with a good amount of fuel/etc.... on board.

51-5200rpm.

Be sure to search the CIG section - LOTS of discussion on what everyone runs.
seafordguy is offline  
Reply
Old 11-07-2009 | 06:58 AM
  #7  
BillR's Avatar
OSO Moderator
25 Year Member
Charter Member
 
Joined: Oct 2000
Posts: 3,580
Likes: 6
From: Virginia Beach, VA
Default

2002 Cigarette Top Gun
TS Bottom
Twin 575SCi (628 hp)
Bravo 1
1.5 gear ratio
32 Pitch Bravo Prop
Non-Labbed - but flat bladed
Top Speed - 94mph
__________________
BillR

'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR is offline  
Reply
Old 11-09-2009 | 07:12 AM
  #8  
Thread Starter
Registered
 
Joined: Oct 2009
Posts: 658
Likes: 0
From: Splendora, TX
Default

Originally Posted by vette131
what rpm's ? 28 maximus not a great match for your combo imho
I am only getting 4400rpms with my 28 Pitch Non-Labbed Maximus Props. My engines were dynoed at 605hp at 5500rpm. That is why I am selling them in the classified. The reason I put this post up was to figure out what props I should get. I don't know what I should get.

I think I need one of the following.
26 or 27 Pitch 4 blade Bravo 1
26 Pitich Maximus Labbeded.
26-27 Pitch Hydomotive 5 blade Non-labbed.

What do you think, anybody....
UrbanDisturbance is offline  
Reply
Old 11-09-2009 | 11:55 AM
  #9  
blue thunder's Avatar
Registered
20 Year Member
 
Joined: Nov 2001
Posts: 3,393
Likes: 6
From: IBX
Default

I would suggest 26p bravo 1 and spin the props in. I have an older strait vee and spinning in made a large difference.
blue thunder is offline  
Reply
Old 11-09-2009 | 12:08 PM
  #10  
4195's Avatar
Can You Hear Me Now??
20 Year Member
Gold Member
 
Joined: May 2005
Posts: 2,757
Likes: 96
From: Old Saybrook CT
Default

Originally Posted by UrbanDisturbance
I am only getting 4400rpms with my 28 Pitch Non-Labbed Maximus Props. My engines were dynoed at 605hp at 5500rpm. That is why I am selling them in the classified. The reason I put this post up was to figure out what props I should get. I don't know what I should get.

I think I need one of the following.
26 or 27 Pitch 4 blade Bravo 1
26 Pitich Maximus Labbeded.
26-27 Pitch Hydomotive 5 blade Non-labbed.

What do you think, anybody....
I would say stay with bravo 4 blades, you would probaly be good with 26p 4 blade bravo and could gain a couple of mph by going with 28p 4 blade labbed finish.
4195 is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.