For sale. Two complete induction setups. Whipple intake coolers, 250 B&M blowers 30 hrs on Blower shop complete rebuilds, Nickerson 1050 dominators, breathers, crossovers, tensioner, belts & pullies. Everything from the block up less ignition. I will separate sets but will not part out setups. These made over 700hp on HP500's 7#boost. $5000/ setup + shipping. Paul 402-981-8402

Price reduced $4500 plus shipping!! One SOLD

The Whipple intakes are 3" shorter than other coolers, I ran these in a 32 outlaw. Blocked up the engine hatch 2". Boat ran a best speed of 92mph.

That's a Nice Setup. Looking to go a different route?

Took the blowers off in preparation to sell the boat, found some 500efi kits & put those on. I really miss the power, the midrange pull is something else.

Dean built my Dom. I run a similar setup but no inter cooler I have had some trouble getting the carb leaned out when I got it and Finally pulled the powervalves out. Are you still running the powervalves?

Yes

What exactly do you mean "blocked up the engine hatch"?

2" blocks at the hinges, dropped the upper part of the back seat on the hatch. Breather bolts touched the hatch. I don't think even another 32 outlaw owner would notice the difference.

Thats a very good price for some nice complete set ups. Those Whipple intake/chillers are over 3k each.
I'll throw in for Shredder that these were fresh water used at LOTO.
Heck Paul, I think they would be great on your 382

Is that a MOAC? and is it standard deck height intake?