26 Outlaw Gelocat Issue
05-21-2010 | 10:22 AM
#1
Thread Starter
Registered
Joined: May 2009
Posts: 125
Likes: 0
From: Glenwood, Maryland
26 Outlaw Gelocat Issue
Hey Guys:
I have a 2008 26 Outlaw with a black hull. When I took the shrink wrap off this spring I noticed a "cloudy / hazy" spot about the size of my hand in the black gelcoat on the port side of the hull. I have wet sanded about as much as I am comfortable with and no improvement. Any ideas or suggestions as I doubt that Sea Ray / Brunswick will be of much help as it is not structural in nature.
Thanks,
Steve
I have a 2008 26 Outlaw with a black hull. When I took the shrink wrap off this spring I noticed a "cloudy / hazy" spot about the size of my hand in the black gelcoat on the port side of the hull. I have wet sanded about as much as I am comfortable with and no improvement. Any ideas or suggestions as I doubt that Sea Ray / Brunswick will be of much help as it is not structural in nature.
Thanks,
Steve
05-21-2010 | 12:18 PM
#3
Registered
Joined: Apr 2005
Posts: 2,957
Likes: 1
From: www.bajaboatowners.com
Hey Guys:
I have a 2008 26 Outlaw with a black hull. When I took the shrink wrap off this spring I noticed a "cloudy / hazy" spot about the size of my hand in the black gelcoat on the port side of the hull. I have wet sanded about as much as I am comfortable with and no improvement. Any ideas or suggestions as I doubt that Sea Ray / Brunswick will be of much help as it is not structural in nature.
Thanks,
Steve
I have a 2008 26 Outlaw with a black hull. When I took the shrink wrap off this spring I noticed a "cloudy / hazy" spot about the size of my hand in the black gelcoat on the port side of the hull. I have wet sanded about as much as I am comfortable with and no improvement. Any ideas or suggestions as I doubt that Sea Ray / Brunswick will be of much help as it is not structural in nature.
Thanks,
Steve
