Livorsi Mega Race Series Guages
08-12-2010 | 06:40 PM
#1
Thread Starter
Registered
Joined: Jul 2003
Posts: 716
Likes: 5
From: Annapolis, MD
Livorsi Mega Race Series Guages
How hard is it to install a new mega race series guage in place of an old style screw style back. What are the color code of the 4 wires on the Wire Harness with these guages?
08-12-2010 | 07:14 PM
#2
Registered
Joined: Jan 2006
Posts: 1,820
Likes: 0
From: Royal Oak, MI
I've been wondering the same thing, and I'd think it's pretty easy.
It's much easier probably to work w/ the small connector to attach to the existing dash wiring and then plug into the gauge than to try to screw down the wiring to a whole gauge. Depends on how long the dash wiring is and how tight the space.
It's much easier probably to work w/ the small connector to attach to the existing dash wiring and then plug into the gauge than to try to screw down the wiring to a whole gauge. Depends on how long the dash wiring is and how tight the space.
08-12-2010 | 09:49 PM
#3
Registered
Joined: Oct 2000
Posts: 611
Likes: 0
they are pretty easy to work with in the installs i have done with them which has been 3 or 4 new boats....
only thing i do is ditch the 12" pigtail and crimp on wires that are long enough to go where i want them to go as well as changing the signal wire to whatever color the guage is for like tan for temp etc....
color code is as follows
Black = Ground
Purple = 12v Key on Power
Blue = Dash lighting
Green = Signal from sender (this is the one i like to change the color to something a little more fitting
heres a 30 skater dash i just did recently using them....
here is a 30 Superboat CC i just finished with them as well....
if your doing a complete rerig of a dash then making your own length pigtails is the way to go....if your refitting then the 12" standard tails will probably come in handy IMHO......
only thing i do is ditch the 12" pigtail and crimp on wires that are long enough to go where i want them to go as well as changing the signal wire to whatever color the guage is for like tan for temp etc....
color code is as follows
Black = Ground
Purple = 12v Key on Power
Blue = Dash lighting
Green = Signal from sender (this is the one i like to change the color to something a little more fitting
heres a 30 skater dash i just did recently using them....
here is a 30 Superboat CC i just finished with them as well....
if your doing a complete rerig of a dash then making your own length pigtails is the way to go....if your refitting then the 12" standard tails will probably come in handy IMHO......
Last edited by GEORGE YURICK; 08-12-2010 at 09:52 PM.
