bravo assemblies..HD? HP? Standard??
11-27-2010 | 11:26 AM
#1
Thread Starter
Registered
Joined: Aug 2007
Posts: 1,038
Likes: 2
From: St.Louis MO
bravo assemblies..HD? HP? Standard??
OK, I thought I knew the difference, but maybe I dont..can someone pleassseeee explain the difference, and pics would be helpfull too..I know hp have the dimples in the bellhousing correct? Do the HDs? ......
11-28-2010 | 10:37 AM
#3
Charter Member #601
Joined: Dec 2000
Posts: 3,276
Likes: 5
From: Holland, Mi USA.
stlliberator,
If you are talking about the transom assy.. the easiest way is to look for trim senders on the hinge pins. If they are there it is a standard. If they are not and you see SS hing pins bolted in from the outside. It is a HP gimbal and helmet.
I am not familar with HD? And not sure if some had dimples and some did not. It is for clearance of the upper pin ubolt, I believe.
If you are talking about the transom assy.. the easiest way is to look for trim senders on the hinge pins. If they are there it is a standard. If they are not and you see SS hing pins bolted in from the outside. It is a HP gimbal and helmet.
I am not familar with HD? And not sure if some had dimples and some did not. It is for clearance of the upper pin ubolt, I believe.
12-03-2010 | 03:46 PM
#4
Registered
Joined: Jul 2004
Posts: 7,152
Likes: 13
From: Toms River, NJ
stlliberator,
If you are talking about the transom assy.. the easiest way is to look for trim senders on the hinge pins. If they are there it is a standard. If they are not and you see SS hing pins bolted in from the outside. It is a HP gimbal and helmet.
I am not familar with HD? And not sure if some had dimples and some did not. It is for clearance of the upper pin ubolt, I believe.
If you are talking about the transom assy.. the easiest way is to look for trim senders on the hinge pins. If they are there it is a standard. If they are not and you see SS hing pins bolted in from the outside. It is a HP gimbal and helmet.
I am not familar with HD? And not sure if some had dimples and some did not. It is for clearance of the upper pin ubolt, I believe.
