motion 35 old race boat w/ob's
#1
http://miami.craigslist.org/mdc/boa/2149127296.html who knows anything about the cond. I know it was at larry goldmans before.
#3
I don't care what dreams he has . I would like to move up and someone has to know what's the history? repaired or sank I have seen it for 15,000 and always wondered if the three o/b's work on these and are somewhat reliable.
#4
That boat was called Notorious back in the day and used to race pro stock class in the late 90s. It had a single canopy with driver in front of throttleman. It was competitive and used to be maintained by Scott Mander of SC performance.
#5
Registered

Joined: Nov 2003
Posts: 2,500
Likes: 148
From: Cape Coral, FL
http://miami.craigslist.org/mdc/boa/2149127296.html who knows anything about the cond. I know it was at larry goldmans before.
http://www.offshoreonly.com/classifi...o37725-en.html
#6
I thought about redoing this boat about 6months ago. So i called the guy. He is really hard to talk to and I asked him to send me some pictures over of the boat. He sent me one picture and all it showed was the cockpit basically all cut up and fiberglass pieces screwed together. I figured it would take way too much money to fix it right. If it was me and I was in the market for a project i would be looking hard at that 32 Skater for sale for 38K and it has 3 2.4's on it. Part out the engines and install either twin 300x's or 300xs's.
http://www.offshoreonly.com/classifi...o37725-en.html
http://www.offshoreonly.com/classifi...o37725-en.html
#7
thanks you guys, I will look at it during the boat show . I could fix the inside up somewhat inexpensively, if the hull is not all stressed out and run two 300"s? If it looks ok, I hope he dosen't get too insulted with my cash offer.
#8
I thought about redoing this boat about 6months ago. So i called the guy. He is really hard to talk to and I asked him to send me some pictures over of the boat. He sent me one picture and all it showed was the cockpit basically all cut up and fiberglass pieces screwed together. I figured it would take way too much money to fix it right. If it was me and I was in the market for a project i would be looking hard at that 32 Skater for sale for 38K and it has 3 2.4's on it. Part out the engines and install either twin 300x's or 300xs's.
http://www.offshoreonly.com/classifi...o37725-en.html
http://www.offshoreonly.com/classifi...o37725-en.html
#9
Registered

Joined: Nov 2003
Posts: 2,500
Likes: 148
From: Cape Coral, FL
How right you were. 2nd time I have talked to him and no pics. has been in the sun for 5 years. Trailer is steel and needs work deck has what he said was grey bondo spots. Scot mander did some work on it, so some of it must be done right. Can you post that pic he sent you if you still have it. just liked the 35' length, light weight, but that skater is a deal.



