i have tried everything and my cat is still hopping unless im in 2'+ chop.

any ideas?

put some weight in the front,

try 2 60# sand bags from home depot

Props turning inward or out, my boat did the same turning in switched to outwaed and it went away. Just a thought!

ive tried inwards and outwards no change.

weight in the from makes it worse i think its too much transom lift .

what prop dia for ssm #4 are working the best and X dimension ?

Which props areu running?

Good tune but I'd rather hear the engines......

Tell us more about your setup...

Engines?

How far forward are they?

Drives?

Extension boxes?

Prop center line height?

Props?

Did you gut the cabin out?

4.25" Above
17" Dia Props
#4's On Boxes
Drives Are 56" Apart.

This Is A Drawing To Scale From The Rear. Looks To Me Like I Would Get More Water On The Inside Of The Tunnel And More Bow Lift With The Props Turning Out.

1 inch spacers ..or more power so you go fatser should solve the porposing !

I'm 2.75 above the bottom. 17.5 dia. props....I'm going to try turning out... Why you ask? Because looking for better handling and I've never tried it.

Tseph has a similar setup to you and I....I'm waiting to see how his runs