Tyler Crockett-Raylar HO600 dyno results
05-18-2011 | 06:12 PM
#1
Thread Starter
Registered
Joined: Jan 2004
Posts: 2,777
Likes: 12
From: San Diego, California
Tyler Crockett-Raylar HO600 dyno results
Baja Man and other 496 Merc owners:
Hey Wayne, talked to Tyler this afternoon and he was able to get your new Raylar HO600 finished and on his dyno.
You may already have the news from Tyler but I thought I would also post congratulations here on OSO to you and Tyler for a nice successful engine project.
Thanks to Tyler's excellent build procedures and Raylars great performing 496 engine kits and parts he was recording 660HP @ 5600 rpms and 640 lb/ft. of torque on the dyno pulls today!
This should also help other OSO members and boat owners with 496 Merc engines relaize that they don't need to pull and sell their 496's and buy other expensive power!
It is also nice to know and show that its very easy to make 625-650HP+ with the 496 Gen 7 engine with out supercharging and on 89-91 pump gas! Who Says 496's Don't Rock!!
Hope you are excited and happy for the results. Thank you for your support and belief in Raylar 496 engine equipment and kits and I am happy we can deliver the results we told you about from the start.
Its also nice for Raylar to know that in the last two months three other customers and shops independent of Raylar achieved the same type of results with their Raylar HO600 packages.
Just be easy on the stick with the engine back in your boat and hopefully that Bravo drive will stay strong for the season!
Glad you will be able to use the Monster for Memorial Day!
Have Fun, Enjoy and Be Safe!
Best Regards,
Ray @ Raylar
Hey Wayne, talked to Tyler this afternoon and he was able to get your new Raylar HO600 finished and on his dyno.
You may already have the news from Tyler but I thought I would also post congratulations here on OSO to you and Tyler for a nice successful engine project.
Thanks to Tyler's excellent build procedures and Raylars great performing 496 engine kits and parts he was recording 660HP @ 5600 rpms and 640 lb/ft. of torque on the dyno pulls today!
This should also help other OSO members and boat owners with 496 Merc engines relaize that they don't need to pull and sell their 496's and buy other expensive power!
It is also nice to know and show that its very easy to make 625-650HP+ with the 496 Gen 7 engine with out supercharging and on 89-91 pump gas! Who Says 496's Don't Rock!!
Hope you are excited and happy for the results. Thank you for your support and belief in Raylar 496 engine equipment and kits and I am happy we can deliver the results we told you about from the start.
Its also nice for Raylar to know that in the last two months three other customers and shops independent of Raylar achieved the same type of results with their Raylar HO600 packages.
Just be easy on the stick with the engine back in your boat and hopefully that Bravo drive will stay strong for the season!
Glad you will be able to use the Monster for Memorial Day!
Have Fun, Enjoy and Be Safe!
Best Regards,
Ray @ Raylar
05-18-2011 | 07:29 PM
#3
Gold Member
Joined: Jul 2008
Posts: 3,748
Likes: 869
From: Delray Beach, FL
Ray, here is my HO600 build with DTS dyno sheet and some videos of the engine and dyno pull. These engines can look good and run very well. I am very happy with my Raylar HO600
Engine
http://www.youtube.com/watch?v=Hx0-guxrsWk
Dyno Pull
http://www.youtube.com/watch?v=zM-7L4bzsw8
Cmon Wayne - get some pictures!
Engine
http://www.youtube.com/watch?v=Hx0-guxrsWk
Dyno Pull
http://www.youtube.com/watch?v=zM-7L4bzsw8
Cmon Wayne - get some pictures!
