This Spring I had an isse with the slave solenoid replaced it boat worked fine. Now its doing the same thing again. I can not imagine the solenoid is bad already, if it is what could have caused it to go so quick.

Either way I have on being overnighted and I havent been out to really troubleshoot due to the rain. But there is a big weekend and I cant miss out. Im going to replace the solenoid or at least test the one in there now. If its not that Im thinking its the neutral safety switch. I know its the yellow wire I think on the slave solenoid but wanted to confirm and how do you by pass it?

you would have to go to the switch, in the shifter to by pass it

Neutral Safety switch is in the controls. It is a very tiny switch.

thanks