Mechanical indicator cable bellow?
10-01-2011 | 09:52 PM
#1
Thread Starter
Registered
Joined: Apr 2009
Posts: 636
Likes: 0
From: Englewood, OH
Mechanical indicator cable bellow?
Seems like 9 out of 10 boats I see don't use bellows for the indicator cable on tabs/drive.. wondering if the bellow is actually required for the end of the cable or what?
I just went with some indicators on the 24 and they have new bellows of course, just got curious about em.
Pic from Stainless Marine's website:
I just went with some indicators on the 24 and they have new bellows of course, just got curious about em.
Pic from Stainless Marine's website:
Last edited by ndaniels; 10-01-2011 at 09:54 PM.
10-02-2011 | 12:08 AM
#2
Registered
Joined: Jan 2001
Posts: 710
Likes: 1
From: Cincinnati, OH
The K-plane fitting is supposed to be water-tight. Fountain uses shrink tube around the cable between the end and that fitting. I had to have the cable replaced on one of my K-planes and the shrink tube was not replaced and I had no leaks. Just to make it look like "factory install", I bought some shrink tube (either 3/8 or 1/2" - dont remember anymore) and made it look the same as it did from the (Fountain) factory. There was no "bellows".
