I just recently lost a motor. It looks like The aeromotive fuel pump
Failed. Pulled the fuel injectors to have them tested. the guy who was going to test the injectors called me and said "most of the injectors are plugged with some kind of rust looking plastic stuff".
I then took the injectors to the person who installed the fuel pump and at that time installed a whipple SC. I showed him the stuff that was pulled out of the injectors. with out any hesitation he said "this looks like epoxy from the fuel pump. took the fuel pump apart and sure enough that's were the stuff is coming from.

Has anyone else had this problem.

Thanks,
jdelo

I have the 1000 HP version that pumps 500Lbs / Hr About 6 hours on the new engines and no problems (yet) Which pump were you running?

I use a filter before and after this pump.