Couple quick transmission questions.

1. What size bolt is needed for the side mounting bosses?

2. When converting from a trs plug in to a #V driveline style, what does everyone do for the shifting linkage, no provisions on the huber 1350's for linkage?

I used an alum. bracket that had tabs, if I remember correctly, that attached to 2 bellhousing bolts and a flat area in the center, between the tabs, that the Morse cable adapter that held the end of the shifting cable, bolted to. I may have 2 brackets, I will look if you are interested.

Gary
612-247-7081

Thanks Gary, I figured I would have to fab something up to mimic the trs setup. If you have a second to look that would be great.

Sorry, Rob. I did a quick scan of all the transmission parts and the only shift cable brackets that I have are a pair for #6 plug-in transmissions.

Konrad makes a nice shift bracket for the BW trans. mounts right up to the boss on the case. Call Pete in parts if interested. 715-386-4203

Thanks for looking, I appreciate it!!!

Just got off the phone with Pete, thanks for the tip!!!

Glad I could help!

Kurt

The side bolt holes are 7/16"-14

Awesome thanks!