Any suggestions ?
#1
Thread Starter
Registered

Joined: Jan 2008
Posts: 2,357
Likes: 2
From: San Diego
Here is my info./.Thinking about 33 herings 5 blade? Looking for more top end
Hering 6 blade 15.5
4,000 RPM to plane
3000 RPM 57 mph
3500 RPM 68 mph
5200 RPM 93.4
Maximus 5 blade 15.5/8
( conditions may have been better w cooler water and a tiny bit more choppy)
3,000 RPM to plane
3000 RPM 59 MPH
3500 RPM 70 MPH
5300 RPM 94.8 MPH
The six blade felt really nice as far as the boat getting set. boat felt nice ( not so glued in in the rear as the maximus)
Hering 6 blade 15.5
4,000 RPM to plane
3000 RPM 57 mph
3500 RPM 68 mph
5200 RPM 93.4
Maximus 5 blade 15.5/8
( conditions may have been better w cooler water and a tiny bit more choppy)
3,000 RPM to plane
3000 RPM 59 MPH
3500 RPM 70 MPH
5300 RPM 94.8 MPH
The six blade felt really nice as far as the boat getting set. boat felt nice ( not so glued in in the rear as the maximus)
Last edited by mcprodesign; 06-16-2012 at 12:41 PM.
#3
I believe we spoke this AM.
The Hering 5 blade should provide very good top end.
A Labbed Maximus could provide the best all around performance as well as better top speed.
Brett
The Hering 5 blade should provide very good top end.
A Labbed Maximus could provide the best all around performance as well as better top speed.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
#4
Thread Starter
Registered

Joined: Jan 2008
Posts: 2,357
Likes: 2
From: San Diego
#5
Thread Starter
Registered

Joined: Jan 2008
Posts: 2,357
Likes: 2
From: San Diego
Brett, I spoke with you today and I must say that you have helped me out so much w my decisions in props ! You are a great guy to have around Thanks again
Chad
Chad
Last edited by mcprodesign; 06-26-2012 at 04:45 PM.
#6
Thread Starter
Registered

Joined: Jan 2008
Posts: 2,357
Likes: 2
From: San Diego
Fwiw I found a deal on some 32 hering 5 bl. I think I need to be higher to run the 6 bl and it's already too hard to plane w my set up.
Also we can see what the real top end dif is between stock Hering and Maximus. I'm excited !
Also we can see what the real top end dif is between stock Hering and Maximus. I'm excited !
Last edited by mcprodesign; 07-03-2012 at 12:26 AM.
#8
Hey wait a minute. What about us? LOL
The stock Max props have .4% better slip number than the Herings. Labbing the Maximus props could and should be the better choice!
Glad I could help though................
Brett
The stock Max props have .4% better slip number than the Herings. Labbing the Maximus props could and should be the better choice!
Glad I could help though................
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Last edited by bbladesprops; 01-24-2013 at 10:58 AM.
#9
Thread Starter
Registered

Joined: Jan 2008
Posts: 2,357
Likes: 2
From: San Diego
Here is my info./.Thinking about 33 herings 5 blade? Looking for more top end
Hering 6 blade 15.5
4,000 RPM to plane
3000 RPM 47 mph
3500 RPM 58 mph
5200 RPM 93.4
Maximus 5 blade 15.5/8
( conditions may have been better w cooler water and a tiny bit more choppy)
3,000 RPM to plane
3000 RPM 50 MPH
3500 RPM 60 MPH
5300 RPM 94.8 MPH
The six blade felt really nice as far as the boat getting set. boat felt nice ( not so glued in in the rear as the maximus)
Hering 6 blade 15.5
4,000 RPM to plane
3000 RPM 47 mph
3500 RPM 58 mph
5200 RPM 93.4
Maximus 5 blade 15.5/8
( conditions may have been better w cooler water and a tiny bit more choppy)
3,000 RPM to plane
3000 RPM 50 MPH
3500 RPM 60 MPH
5300 RPM 94.8 MPH
The six blade felt really nice as far as the boat getting set. boat felt nice ( not so glued in in the rear as the maximus)
#10
Thread Starter
Registered

Joined: Jan 2008
Posts: 2,357
Likes: 2
From: San Diego
Brett you always help and I thank you. I will go no where else for Mercury props. Just that Jeff took care of me too. Thanks again for your continued support. Chad




