I have a pair of 383's. I spun a coupler this past week so the engine is coming out and I've had a few small nagging oil leaks. I'm going to reseal everything except the heads. Any gasket recommendations and gasket maker. It looks like small oil pan drip and possibly back bottom of intake. Only when under load and above 3000 RPM's.

you didn,t say what year the engines are,i like the fel-pro 1 peice pan gasgets,and also like their intake gasgets,but i dont use the end seals,i use the right stuff silicone rubber,it never leaks.

The engines are Gen 1. I like the sound of never leaks. I'm over oil in the bilge.

Chris

I just had to replace an oil pan on my stbd engine due to rot around the drain plug. what a pain in the azz.

+1. I do the same thing an use fel-pro.