Replacing Sending Units?
08-17-2012 | 04:12 PM
#1
Thread Starter
Registered
Joined: Apr 2011
Posts: 193
Likes: 0
Replacing Sending Units?
Hey Guys,
How hard is it to replace sending units for the fuel gauge and the oil pressure gauge on a 502 mag mpi? I'm real sick of not knowing how much fuel I have or what my oil pressure is.
How hard is it to replace sending units for the fuel gauge and the oil pressure gauge on a 502 mag mpi? I'm real sick of not knowing how much fuel I have or what my oil pressure is.
08-18-2012 | 11:48 PM
#4
Registered
Joined: Jan 2004
Posts: 4,480
Likes: 43
From: Tennessee
There should be an access cover, usually under the rear seat, to get at the fuel sender. Call Livorsi and get one of their fuel level senders. They work much better than the old float type senders.
They can also supply your oil pressure sender. The 80# is the sender you need. I think the part # is GSOP.
Eddie
They can also supply your oil pressure sender. The 80# is the sender you need. I think the part # is GSOP.
Eddie
