Just picked up a old Malibu Trantrum Ski Boat and have removed the carpet to have some type of non skid flooring sprayed in such as bed liner. I have already scraped up all that I can and followed up with pressure washing with a zero tip and have about 70% of the glue reoved. The remaining 30% of the glue just will not budge. Does anyone know of any chemical adhesive remover that is fiberglass & gelcoat friendly that will finish the job and get the remaining glue off and out of the low spots/valleys of the fiberglass roving . Not wanting to grind, wire cup wheel or sand.

Thanks,
Cliff

try wilsonart 131

Thank you

3M adhesive remover. Google it.

Adhesive remover from home depot if water based. Goof off if oil based.