Hi im looking for some information about a boat hull design called Avenger 25 serial number ABD11111c797 originally designed for an inboard engine. i would like to know who made these hulls and if it would be possible to see some pics of some others

thanks

the ABD comes back as the following

Details for Manufacturer Identification Code ABD
MIC: ABD Status: In Business
Company: ATLANTIC BOAT SERVICE INC Company Official: JORGE L GUIA
Parent Company: Parent MIC:
Address: 2387 NW 149 STREET City: OPA LOCKA
State: FL Zip: 33054
Country: Phone: 7863673705
Fax: In Business: Thursday, May 19, 1994
Out of Business: Date Modified: Thursday, September 16, 2010
Type: Outboards, Open Motorboats, Jon Boats
Inboards, Cabin Cruisers
Inboards, Cabin Cruisers
Additional Address: CELL PHONE 7863673705 LAT/LONG: 25.901N 080.239W CO-LOCATED WITH AVR.
Comments: (ABD) WAS AMERICAN INTERNATIONAL BOAT COMPANY 3539 WASHINGTON ST JAMAICA PLAIN MA 02130. OOB 780517. 980707 ADDRESS CHANGE; WAS 3735 NW 78TH ST; (305)888-1413. 991004 ADDRESS CHANGE; WAS 3740 NW 78 ST; MIAMI 33147. 7/26/05 ver visit, phone disconnected, neighbor says works nights. 082005 msd phone changed to present cell from 3056968294 and (305) 397-4404 (BEEPER NO.) no longer used; confirmed active working nights.

These boats weren't built of the best quality. They built a V bottom and a cat. If you boat in the ocean or in a sloppy/ruff lake I don't recommend it. They chine walk like hell at high speeds. From all 24/7 hulls they were the worst. I would look into a pantera or carrera instead....

If I can see some Pictures, I can better tell you what it is.

Ok will try to get some pics up this week I have already started to do some work on the boat so it's down to a empty hull now!!

since you are redoing the boat, the stringers on those boats don't run all the way to front of the hull. They stop like in the beging to middle of the cabin and if they are ran hard, it has the tendency of delaminated in that area. Take my word. i owned this one serveral yrs ago and it happened. I ended up running the stringers all the way to the front of the cabin. http://miami.craigslist.org/mdc/boa/3306478108.html

Here are a few quick pics of the boat under work will update my progress as i go along

the top floor had been removed the gas tank removed everything out!

Removed the bracket from the stern next weekend will start the sanding progress any ideas for paint open for anything!!!

Thess boats were built from the 26 Martini Mold
They were also building a 24 Center Console that came out of the same mold but with a spacer and different Deck.
Very similiar to Pantera, Carrera, P&D and others if not the same.

I've know Jorge Guia for 20 + years. He's a good guy and a good FRP man. The avengers were made from the P & D molds. Jorge also had the 31 Sunshine/ P & D hull mold that I ended up buying (then sold them to Gito at Zero Tolerance) The avengers were built right next to the 25 Active thunders. I set up Jorge with Pat back in 97 when AT was overwhelmed with orders. The other partner (silent) in Avenger was Peter Roca who now has a big shop in Opalocka. Jorge is not in boats any more.