Full Force

iTrader: (5)

I want to do something different with my step plates on my gunnel, right now they are stainless with 4 small strips of teak, I thought about removing them and covering with a simple white gip tape, any other ideas? they are approx 4" wide by 28" long or so..

Full Force

iTrader: (5)

ok, maybe 32-36" long... kinda see em in the picture...

Sydwayz

iTrader: (1)

A buddy bought a boat that was sprayed with bedliner material right at those areas, and it has worn very well (obviously). You might look to see if you can find someone who does colored bedliner spraying in your area. Red and/or black would look great.

Full Force

iTrader: (5)

Hmmmmmm that might be pretty cool..

tcwcar

iTrader: (1)

I had a plastic shop machine me 2 for my Cig Mystique out of 1/2" by 35" plastic, just remembered I'm on cheap status cant post pics, if you want to see them e mail me at [email protected]

caseyh

Doing the purple bed liner for the floor in my bullet.

A pice of plastic with cigarette milled into it with LEDs under it for the night time effect. Or some teak with cig in it.

ItsPeanut

Keep it original. Refinish them. I like the older classic look. Just a thought.

Holy Smokes

iTrader: (2)

x2 - My old Cig had those as well. The teak strips will slide out and you can scrub the aluminum extrusion, clean the teak and re-insert.

502ss

iTrader: (3)

Some aluminum bar stock and a a little time in front of the buffing wheel and you can make somre pretty cheap step plates.

bwd

iTrader: (1)

Pirelli flooring or rolled awlgrip with sand. my .02 Great lookin boat btw