Rear side rails and docking lights wanted.
#1
Thread Starter
Registered
Joined: Mar 2005
Posts: 1,266
Likes: 0
From: Mine Hill, NJ/Lake Hopatcong, NJ
Since my boat had an arch when I purchased it, the rear rails were removed. Any one have a set that will work on a 32 fever? Also looking for a set of the factory docking lights. Mine work fine but are cracking badly. Thanks in advance.
#2
Can't help you out on parts, but your 32 had an arch? Never seen that.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
#3
Thread Starter
Registered
Joined: Mar 2005
Posts: 1,266
Likes: 0
From: Mine Hill, NJ/Lake Hopatcong, NJ
#4
Registered
Joined: Apr 2009
Posts: 97
Likes: 0
From: Forest, Va
I bought a 97, 35 lightning late last fall. The docking light lens were cracked and I contacted Fountain to see if I could get the lens. They told me that the only thing they had was the complete unit. Gail told me to check with www.barnegatlt.com. They had the housing for 84.00 each. Could not get just the lens cause it is a 1 piece molded assembly. I called barnegat and they told me what I had to have. I do not know if yours are like mine or not but I thought I would let you know what I had to get.
#5
Thread Starter
Registered
Joined: Mar 2005
Posts: 1,266
Likes: 0
From: Mine Hill, NJ/Lake Hopatcong, NJ
I bought a 97, 35 lightning late last fall. The docking light lens were cracked and I contacted Fountain to see if I could get the lens. They told me that the only thing they had was the complete unit. Gail told me to check with www.barnegatlt.com. They had the housing for 84.00 each. Could not get just the lens cause it is a 1 piece molded assembly. I called barnegat and they told me what I had to have. I do not know if yours are like mine or not but I thought I would let you know what I had to get.
These are exactly what I have. $427 online
http://www.lightinguniverse.com/mari...kLoc=quickView
Last edited by prostock85; 02-19-2013 at 06:20 PM.
#6
Registered
Joined: Apr 2009
Posts: 97
Likes: 0
From: Forest, Va
That is what I have. That is the whole light assembly. All you need is the housing. My invoice from Barnegat says, "description" QL-32 white with lens. "Item number" 8010-000-140
$89.22 each
Call them to verify your needs.
$89.22 each
Call them to verify your needs.




