BBlades, I need a new cover.
09-26-2013 | 08:34 PM
#2
Thread Starter
VIP Member
Joined: Oct 2002
Posts: 5,246
Likes: 3
From: Ivoryton, CT
3 people, 1/4 tank, small cooler, extra prop on board, mid 60s, just a ripple on the CT river...
25P Turbo Fusion 4:
27.9mph @ 2100rpm
47.8mph @ 3200rpm
56.4mph @ 3700rpm
67.9mph @ WOT-4500rpm
25P Merc Revolution 4:
28.3mph @ 2200rpm
45.3mph @ 3200rpm
55.7mph @ 3700rpm
71.4mph @ WOT-4800rpm
The boat was vary loose with trim running the F4; did not go much past 1/2 way to the max.
The boat had lots of lift, ran rock solid, and you could trim to the moon running the Rev 4. I will buy this prop.
25P Turbo Fusion 4:
27.9mph @ 2100rpm
47.8mph @ 3200rpm
56.4mph @ 3700rpm
67.9mph @ WOT-4500rpm
25P Merc Revolution 4:
28.3mph @ 2200rpm
45.3mph @ 3200rpm
55.7mph @ 3700rpm
71.4mph @ WOT-4800rpm
The boat was vary loose with trim running the F4; did not go much past 1/2 way to the max.
The boat had lots of lift, ran rock solid, and you could trim to the moon running the Rev 4. I will buy this prop.
__________________
Patrick
Patrick
Last edited by Pat McPherson; 09-26-2013 at 08:44 PM.
10-01-2013 | 06:55 PM
#3
Thread Starter
VIP Member
Joined: Oct 2002
Posts: 5,246
Likes: 3
From: Ivoryton, CT
Yo Brett, I got the new cover. Thanks
Your PM box is full; sent you an e-mail.
I also left a question for you with Kayla about what can be done with my 25p Mirage. Cost to lab? potential top speed gain?
Your PM box is full; sent you an e-mail.
I also left a question for you with Kayla about what can be done with my 25p Mirage. Cost to lab? potential top speed gain?
__________________
Patrick
Patrick
Last edited by Pat McPherson; 10-01-2013 at 07:01 PM.
