New 22ZX owner to forum
#1
Registered
Thread Starter
Join Date: Aug 2013
Location: Sacandaga Lake
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
New 22ZX owner to forum
Hi everyone my name is Matt. A week ago I purchased a 2002 22ZX with a 350MAG in it. New to the Donzi family but been boating for a long time. I mostly boat upstate NY (Sacandaga, Lake George, Upper Hudson River..) Looking to meet some new people and do as many meets/runs as I can next summer. For the life of me I cannot change my profile picture.. Do you have to be a paying member for that?
#4
Gold Member
Gold Member
#5
Registered
Thread Starter
Join Date: Aug 2013
Location: Sacandaga Lake
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I will definitely attempt to make it to LG in July. Sending PM shortly..
#8
Registered
Thread Starter
Join Date: Aug 2013
Location: Sacandaga Lake
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
2002 350MAG 300HP with Alpha 1 Gen 2 1:47 Ratio - Running a Turbo 2+2 14"Diam with 20"pitch @ 60mph on the speedo. That was with a drive that was about to blow making all sorts of terrible noises. Just replaced it yesterday and I will see what it does this weekend. It use to have a 21 pitch 4 blade on it and I was running right about the same speeds.
#9
Registered
Trying to figure out props. I have a Rev 4 19 pitch now, it comes out of the hole hard but at 4800 rpm's I get 51 mph.
Let me know how it turns out I might have to get the prop that you use. I measured from the bottom of the hull to the center of my prop and got roughly 9". What is your x dimension ?
Let me know how it turns out I might have to get the prop that you use. I measured from the bottom of the hull to the center of my prop and got roughly 9". What is your x dimension ?
Last edited by Donzi Z22; 06-25-2016 at 08:14 PM.