38 donzi zr MPH
#1
Thread Starter
Registered
Joined: May 2014
Posts: 6
Likes: 0
Just got our new boat. A 2007 38zr with 525's (staggered)
It seems that most with this boat are hitting high 80's on fresh water. We are only getting 79 mph with 32 pitch 5 blade props spinning in.
Anyone have any ideas?
At 3,000 rpm 42mph
At 3,500 rpm 53mph
At 4,000 rpm 62mph
Wot and over trimming it (about 6) I can get it to 4,900 rpm (boat has about 100hrs on it)
In side the props are very carboned up looking and when idling areound the motors smell very rich. Is this normal for 525's?
Thanks for the help
It seems that most with this boat are hitting high 80's on fresh water. We are only getting 79 mph with 32 pitch 5 blade props spinning in.
Anyone have any ideas?
At 3,000 rpm 42mph
At 3,500 rpm 53mph
At 4,000 rpm 62mph
Wot and over trimming it (about 6) I can get it to 4,900 rpm (boat has about 100hrs on it)
In side the props are very carboned up looking and when idling areound the motors smell very rich. Is this normal for 525's?
Thanks for the help
#3
Your slip % at WOT is over 20%. This is a bit too high.
Are the propellers Mercury props? Have they been worked? Also, do you know the X dimension on the boat?
The ZR hulls are sensitive to X dimension. We could try some other props. Call us if we can help.
Brett
Are the propellers Mercury props? Have they been worked? Also, do you know the X dimension on the boat?
The ZR hulls are sensitive to X dimension. We could try some other props. Call us if we can help.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]




