I have made new molds for the rear sides of the AO 3100. They should fit the Chris Cat and Awesome 31. .Let me know what you think of it. I did this to give more of a west coast look.The retrofit takes approximately 4 weeks. I can retrofit these Boats for $7000.00 at my shop in Texas. If interested Call me at 281-235-5174 or E mail me at [email protected]. [ATTACH=CONFIG]524594[/ATTACH][ATTACH=CONFIG]524595[/ATTACH][ATTACH=CONFIG]524596[/ATTACH]

Looks good. We'll see how much speed it adds to your Shootout Run this year!
Bert

thanks but don't think it will add anything

Please excuse the sarcasm, the molds really modernize the hull from a visual perspective. Any tweaks to the motor or hull to compete in this year's LOTO Shootout? I know you've taken a lot of hardware home in years past with this boat.

I know you were kidding . i have not made any tweeks to the hull or motors. I am still trying to figure out why the motors are getting very rich above 130 mph. it has me stumped. I lowered the fuel pressure from 11psi to 8 psi thinking fuel was getting past the needle and seats but it didn't seem to help. the problem started at last years loto shootout and happened today at the texas outlaw challenge . I won my class at 136 but the transom was black again and was very slugish above 130 mph. last year I easily ran 141 at the Texas outlaw challenge.

that's fast! how much HP you need to run that speed?

850 each motor

Quest, check your inbox.

I checked. the only thing I got from you was a question about the cabin doors which I answered. was there something else

Quest, how you spin your props in or out ?