hose clamps and puppy
05-20-2015 | 12:33 PM
#1
Thread Starter
Registered
Joined: Feb 2002
Posts: 5,008
Likes: 752
From: Traverse City, Michigan
hose clamps and puppy
Between the hose clamp cuts working on the engines and new puppy teeth I look like a cutter and needle addict combo with all the cuts and needle teeth marks
.[ATTACH=CONFIG]541272[/ATTACH]
.[ATTACH=CONFIG]541272[/ATTACH]
05-20-2015 | 02:11 PM
#3
Registered
Joined: Dec 2013
Posts: 516
Likes: 128
From: houston texas
agree on the pup
I feel ya on the cuts
I added a ballast tank with transfer pump in the front vee
and wanted both fuel fills side by side
and had to worm a 1 1/2 fuel fill line though a stringer into the outside cavity through another floor hole into the original cavity that the rest of the hoses/wiring is ran up through
both arms look like a junkie,,lol
but got them fuel fills together,,,,,,,,,,,
I feel ya on the cuts
I added a ballast tank with transfer pump in the front vee
and wanted both fuel fills side by side
and had to worm a 1 1/2 fuel fill line though a stringer into the outside cavity through another floor hole into the original cavity that the rest of the hoses/wiring is ran up through
both arms look like a junkie,,lol
but got them fuel fills together,,,,,,,,,,,
05-20-2015 | 03:45 PM
#4
Registered
Joined: Mar 2013
Posts: 1,102
Likes: 11
From: Granger, Indiana
agree on the pup
I feel ya on the cuts
I added a ballast tank with transfer pump in the front vee
and wanted both fuel fills side by side
and had to worm a 1 1/2 fuel fill line though a stringer into the outside cavity through another floor hole into the original cavity that the rest of the hoses/wiring is ran up through
both arms look like a junkie,,lol
but got them fuel fills together,,,,,,,,,,,
I feel ya on the cuts
I added a ballast tank with transfer pump in the front vee
and wanted both fuel fills side by side
and had to worm a 1 1/2 fuel fill line though a stringer into the outside cavity through another floor hole into the original cavity that the rest of the hoses/wiring is ran up through
both arms look like a junkie,,lol
but got them fuel fills together,,,,,,,,,,,
A couple of weeks ago I tried to lubricate the coupler fittings-- in fact I posted a HELP message to that effect because the grease fitting wouldn't come off the zerk. Long and short I got so banged up, sore and contorted I didn't walk straight for a week-- Advil, Tylenol, were my best friends.
ps that's the last time I will buy anything worth using from Harbor Freight
3pointstar
