T-stat housing plunbing
06-10-2015 | 11:08 AM
#1
Thread Starter
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
T-stat housing plunbing
On a '99 502 with the stock t-stat housing, 2 hose design, is the unused plugged port next to the sender, block pressure?
Moving my WP gauge hose from black drains up to housing. Want to make sure I'm still reading the block pressure and not be influenced by the open/closed state of thermostat or in the discharge cavity, w/o having to remove it to verify flow paths
Thanks
Moving my WP gauge hose from black drains up to housing. Want to make sure I'm still reading the block pressure and not be influenced by the open/closed state of thermostat or in the discharge cavity, w/o having to remove it to verify flow paths
Thanks
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
