Looking for 30' motion with 300's
#1
Thread Starter
Registered

Joined: Jul 2006
Posts: 874
Likes: 46
From: Charleston, il
Looking for a 30' motion with 300's. The earlier style pleasure cockpit not the poker run seating. I've looked closely at Boattrader, powerboatlistings, classifieds here, and scream and fly. Just wondering if anything else is out there?
#3
Thread Starter
Registered

Joined: Jul 2006
Posts: 874
Likes: 46
From: Charleston, il
Budget would keep me out of a 28 skater. Can you elaborate on the Spectre? I began looking at those but am more interested in the Motion because of the wider tunnel and overall width. Thanks
#5
Thread Starter
Registered

Joined: Jul 2006
Posts: 874
Likes: 46
From: Charleston, il
I didn't know about the delamination issues. I really like the size of the cockpit in the 30' Motion.
#6
Registered

Joined: Feb 2007
Posts: 1,555
Likes: 81
From: Columbia S.C.
Motions delam problems are pretty well known. They seem like a big cat in the water. A Friend picked up a Spectre used a couple of years back.Check the rigging. The rigging was terrible and heard of a second Spectre with rigging issues also.As Skatermike stated I think the Spectre is better built. I am interested also in moving up to a 28 or 30 Captiva also. Keep us posted on what you buy and how you like it.
Bob
Bob
#7
Thread Starter
Registered

Joined: Jul 2006
Posts: 874
Likes: 46
From: Charleston, il
Motions delam problems are pretty well known. They seem like a big cat in the water. A Friend picked up a Spectre used a couple of years back.Check the rigging. The rigging was terrible and heard of a second Spectre with rigging issues also.As Skatermike stated I think the Spectre is better built. I am interested also in moving up to a 28 or 30 Captiva also. Keep us posted on what you buy and how you like it.
Bob
Bob
#8
Registered User
Joined: Feb 2007
Posts: 19
Likes: 0
From: Minneapolis, MN
I would like to more about the delamination problems, I am running a 2009 Motion XP with twin 300xs motors, that I am considering selling. It is down in Havasu right now as I am having some upgrades and rigging work down. I am working to make it a little faster boat.
Grant
Grant
#9
Banned
Joined: Jun 2009
Posts: 51
Likes: 0
How many of you Skeeter boys pull up to the Sunoco station and fill it up with 93 without freaking out about that little decal that says ; May contain 10% or less Ethanol ?
What kind of coring do them Skeeter's have ? Amazing how the cheapest made boat's are held in such high regard. Bet you fella's had to run out and buy a new I Phone 6 last month .
There are guys who can break an anvil with a rubber mallet. Don't blame the hull on an incompetent owner/rigger/driver .


