![]() |
Looking for 30' motion with 300's
Looking for a 30' motion with 300's. The earlier style pleasure cockpit not the poker run seating. I've looked closely at Boattrader, powerboatlistings, classifieds here, and scream and fly. Just wondering if anything else is out there?
|
Would lean more towards a 28 Skater. If you have a certain budget, i would than go with Spectre. Just my opinion.
|
Originally Posted by SkaterMike82
(Post 4366924)
Would lean more towards a 28 Skater. If you have a certain budget, i would than go with Spectre. Just my opinion.
|
Lots of Motion's had delamination issues. Also Spectre in my opinion has a much better laminiation scheduled and much better finish. Speed wise there just about the same. My opinion.
|
Originally Posted by SkaterMike82
(Post 4366994)
Lots of Motion's had delamination issues. Also Spectre in my opinion has a much better laminiation scheduled and much better finish. Speed wise there just about the same. My opinion.
|
Motions delam problems are pretty well known. They seem like a big cat in the water. A Friend picked up a Spectre used a couple of years back.Check the rigging. The rigging was terrible and heard of a second Spectre with rigging issues also.As Skatermike stated I think the Spectre is better built. I am interested also in moving up to a 28 or 30 Captiva also. Keep us posted on what you buy and how you like it.
Bob |
Originally Posted by bulletbob
(Post 4367102)
Motions delam problems are pretty well known. They seem like a big cat in the water. A Friend picked up a Spectre used a couple of years back.Check the rigging. The rigging was terrible and heard of a second Spectre with rigging issues also.As Skatermike stated I think the Spectre is better built. I am interested also in moving up to a 28 or 30 Captiva also. Keep us posted on what you buy and how you like it.
Bob |
I would like to more about the delamination problems, I am running a 2009 Motion XP with twin 300xs motors, that I am considering selling. It is down in Havasu right now as I am having some upgrades and rigging work down. I am working to make it a little faster boat.
Grant |
Originally Posted by 454captiva
(Post 4366999)
I didn't know about the delamination issues. I really like the size of the cockpit in the 30' Motion.
How many of you Skeeter boys pull up to the Sunoco station and fill it up with 93 without freaking out about that little decal that says ; May contain 10% or less Ethanol ? What kind of coring do them Skeeter's have ? Amazing how the cheapest made boat's are held in such high regard. Bet you fella's had to run out and buy a new I Phone 6 last month . There are guys who can break an anvil with a rubber mallet. Don't blame the hull on an incompetent owner/rigger/driver . |
What's the story on Triple Shoot Motion 30 for sale on Boat Trader? Does any one have any details about it's history. It has a pair of 300X motors on it now. Thanks
|
| All times are GMT -5. The time now is 03:41 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.