what is the correct prop for a 2005 288 with 496 MAG HO ,fresh water use?

thank you

I ran a labed 24 B1 on my 288 but I have the older non stepped hull and a 502. I was running 69 @5200 - 5250 RPM at WOT. I touched 70 a few times but was into the trailer trim and playing with fire.

I thought I saw where some of the guys were running a 26 B1 with that setup? A labed 26 B1 would probably be a good fit. If you can get your hands on both, I would try them and see what feels best on the boat.

thank you for the reply,just purchased the boat and came with 26 B1 just wanted to make sure that was the correct prop

26 pitch bravo one is what we run from the factory.

thank you

I run a 28 p 4 blade labbed. 550 hp 502. 74 mph single stepped hull

Anyone know what I should shoot for with 600HP on the older Hull? Not sure I can spin a 28 with that or not. Looking to be in the 55-5600RPM range WOT.

I had about 575 HP and ran a labbed 28 Bravo from B Blades. Turned it 5,300 give or take.

my 03 496 ho had a 24 on it. 26 on a mag seems like youd be leaving some rpms on the table imo...