My father in-law spun his hub on a 1989 force 50 hp outboard.
the hub is going to cost him 50 dollars to replace. i was just wondering if anybody out there had one laying around and wants to sell it CHEAP. He doesn't have a lot of money so i'm helping him find one. The one he has is a 12.5 pitch but really anything will work with a higher pitch. new prop at my price from port supply is around 190.00. It has splines and a shear pin along with a plastic cone and cotter pin. Force that year i believe was made by chrysler so any ideas? Anybody have one laying around in somewhat good shape? he has a 22' pontoon boat and it's slow a a turtle
Thanks,
Rick

ya,I might

South Side outboard in Orlando has tons of used props, they should be able to help you ask for Jim Bob 407-658-2628

One question,
Will an Evinrude prop work on a force motor?

If so, I may have a prop that would work for you. It was off of a 60 horse Evinrude-Tracker outboard/Pontoon boat combo. It was just cleaned up at a prop shop, (Midwest Propeller, advertises in Powerboat mag), but we sold the boat is was used on.
E-mail me at [email protected] if interested.

Gordo, so what did you put back on the cowgirl boat for a prop?

We didn't put a prop back on it....ha! Just kidding!

Gordo bought a brand new prop for the cowgirl boat.

Rick,
Be a nice son-in-law and take his prop to the local prop shop and pick up the tab. After all he gave you his daughter didn't he

hey,found one in the barn.....give me an address and pay for the shipping and its yours

My address

Rick Borba
7801 summer harvest ave
Las vegas, NV, 89129
(702)493-5200
PLease let me know how much the shipping and I'll cut a check or money order for you. Thank you so much for looking(finding). If you ever need something out my way please drop me a line and i'll see what i can do. Thanks again

Rick

I didn't know. I figured since the new owners will probably never leave the dock with the boat they wouldn't need a prop - HA!