Donzi Z33 Question...anybody?
#1
Thread Starter
Registered
Joined: May 2017
Posts: 9
Likes: 0
1987 Z33 twin 465 mercs. - pristine classic or maybe not.
I went to charge the batteries today, lifted the engine hatch and the bolts that hold the hydraulic ram came free from the center stringer. I always thought that their was a solid 9 x12 beam that ran from the transom to the bow. is that not the case? Did my beam rot and completely disappear.
I went to charge the batteries today, lifted the engine hatch and the bolts that hold the hydraulic ram came free from the center stringer. I always thought that their was a solid 9 x12 beam that ran from the transom to the bow. is that not the case? Did my beam rot and completely disappear.
#2
Registered

Joined: Nov 2000
Posts: 1,046
Likes: 50
From: Glastonbury, CT
Most likely it runs to a bulk head that is under the rear seat, I took my z-21 apart many years ago it was an 86, and totally shot. Goo luk and a big project it you take it on go to Donzi.net for some support
#3
Thread Starter
Registered
Joined: May 2017
Posts: 9
Likes: 0
Glad to see that I'm not the only one taking on this job!



