Prop Stamp indentification
04-27-2018 | 11:21 AM
#1
Thread Starter
Registered
Joined: Jul 2016
Posts: 7
Likes: 0
Prop Stamp indentification
Have a prop that came with my boat that is not performing very well and was wondering if anyone can Identify the stamping. Wondering if it has been labbed and if so what has been done to it.
Prop is a 24P Bravo 1 with 339U stamped on the outer hub.
Prop is a 24P Bravo 1 with 339U stamped on the outer hub.
05-09-2018 | 03:48 PM
#2
Offshoreonly Advertiser
Joined: Jun 2003
Posts: 3,878
Likes: 47
From: Princeton, Wisconsin
This was not done by BBLADES or Mercury Racing.
If you desire, we can look at the prop and make some measurements and tell you exactly what you have.
Brett
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
