trim sender and limit replacement

Reply Subscribe

Thread Tools

06-25-2018 | 08:31 PM

maasgroup

Thread Starter

Registered

Joined: Jun 2018

Posts: 11

Likes: 0

trim sender and limit replacement

I just watched your video on replacing the trim sender and limit switch. Where can I buy the kit that was used in the video

06-25-2018 | 08:45 PM

phragle

Registered

Joined: Apr 2006

Posts: 10,042

Likes: 712

From: Toledo Oh

Have you tried the internet...they sell all sorts of things there....

06-25-2018 | 08:57 PM

Registered

Joined: Nov 2004

Posts: 14,068

Likes: 3,668

From: On A Dirt Floor

Last edited by SB; 06-27-2018 at 01:43 PM. Reason: Thought OP was a BOT

06-25-2018 | 09:19 PM

BUP

Banned

Joined: Jul 2011

Posts: 9,594

Likes: 45

From: Ft. Worth TX

I have them prob 5 sets on hand all the time.

do not cut the wires and splice to install. I know its alot easier to do so but that way of installing - the limit and the sender will not last.

06-25-2018 | 09:25 PM

phragle

Registered

Joined: Apr 2006

Posts: 10,042

Likes: 712

From: Toledo Oh

then there was the kit with longer wires so you could just drill a new hole in the transom to run the wires, I kid you not......

06-25-2018 | 09:30 PM

Registered

Joined: Nov 2004

Posts: 14,068

Likes: 3,668

From: On A Dirt Floor

....

Last edited by SB; 06-27-2018 at 01:43 PM. Reason: Thought OP was a BOT

06-25-2018 | 09:52 PM

phragle

Registered

Joined: Apr 2006

Posts: 10,042

Likes: 712

From: Toledo Oh

Dont be that guy.....

06-26-2018 | 05:28 AM

maasgroup

Thread Starter

Registered

Joined: Jun 2018

Posts: 11

Likes: 0

Yes there are many kits out there , i like the one in the video cause of the boot that stops it at the right location in the housing. Not sure if the bulkhead connector came with it or if that has to bought somewhere else. That's why I'm asking about where that particular kit was bought

06-26-2018 | 06:07 AM

phragle

Registered

Joined: Apr 2006

Posts: 10,042

Likes: 712

From: Toledo Oh

Don't be that guy. For an afternoon and under $100 bucks you can do it the right way.Be smart and do the bellows while your in there..its probably time anyways...