Garmin unit fastech dash
#1
Thread Starter
Registered

Joined: Oct 2013
Posts: 291
Likes: 4
From: Miami, FL
Hey all
i have a 312 and looking for a good GPS unit. I currently have a 640maps but is very difficult to see it in day light. I am also looking to redo the dash so I think now is the time to replace.
wanted to know which units models everyone is using with good visibility in the day light
i have a 312 and looking for a good GPS unit. I currently have a 640maps but is very difficult to see it in day light. I am also looking to redo the dash so I think now is the time to replace.
wanted to know which units models everyone is using with good visibility in the day light
#3
Registered
Joined: Dec 2012
Posts: 6
Likes: 0
From: Bolton, Ontario
I have a 1997 312 as well and I am looking to replace the complete gauge/dashl.One of my temperature gauges is not working all the time. Can't find one like it so time for an updated dash. I spoke with Steve at Innotech last week about carbon fiber panels and then sent him an email with a picture of the dash. He said he was very busy and I have not heard back from him. I was hoping to fit the Simard G07 in there along with 2 oil, 2 temps, volt, 2 tachs, 1 speed and a gas gauge if possible I hope.
#5
Registered

Joined: Aug 2013
Posts: 479
Likes: 20
From: Lake St. Clair, MI
On a 353 I had to remove the Speedo to fit a GO7, I got the drawings of the panels from Formula. I re-drew them in AutoCAD, so I could move the gauges around to fit the GO7. Since I have the old 502's that pre date the digital era, I had to keep my mechanical gauges
The 7608XSV is an awesome unit too, but it will not fit in a 353 or likely a 312 dash(flush mount) with a bunch of gauges.
Nice 312 link below: Fastech dash redo with pics
The 7608XSV is an awesome unit too, but it will not fit in a 353 or likely a 312 dash(flush mount) with a bunch of gauges.
Nice 312 link below: Fastech dash redo with pics
Last edited by snowrunner; 07-12-2018 at 07:06 AM.



