454 gen 5/6 parts trans TRS CMI headers platform more
09-16-2019 | 08:16 AM
#1
Thread Starter
Brotherhood #1
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
454 gen 5/6 parts trans TRS CMI headers platform more
gen 5 motors have cracked blocks , I can get a good set of blocks 350 each
compete motor 2800, other missing intake, head and I’m sure cam and lifters are no good from being open for years 2000
platform , need a bracket welded 650
bell cooler set ups 350 for the nicer, 300, cooler has a tab repair
staters 75 each
TRS drives 1800 each , hours unknown , spin well
trans clean fluid 750 each
muffler, all 4 100, make 2 usable ones from all
offshore mounts 300 pair
drive plates 150 each
compete motor 2800, other missing intake, head and I’m sure cam and lifters are no good from being open for years 2000
platform , need a bracket welded 650
bell cooler set ups 350 for the nicer, 300, cooler has a tab repair
staters 75 each
TRS drives 1800 each , hours unknown , spin well
trans clean fluid 750 each
muffler, all 4 100, make 2 usable ones from all
offshore mounts 300 pair
drive plates 150 each
09-16-2019 | 08:18 AM
#2
Thread Starter
Brotherhood #1
Joined: Sep 2006
Posts: 12,026
Likes: 111
From: Swansea Mass
CMI split tubes off a TRS but I believe bravo. Holes were recut in transom to fit. 1900 a set
will parts out motors also.
1 set of covers off the apart motor and Arrestor are sold already
will parts out motors also.
1 set of covers off the apart motor and Arrestor are sold already
