Go Back  Offshoreonly.com > Technical > Prop Talk
Prop Help on Sunsation 29 CCS >

Prop Help on Sunsation 29 CCS

Notices

Prop Help on Sunsation 29 CCS

Thread Tools
 
Old 10-05-2024 | 08:19 PM
  #1  
Thread Starter
Registered
15 Year Member
 
Joined: Jul 2009
Posts: 570
Likes: 32
From: Newburgh, IN/Freeport, FL
Default Prop Help on Sunsation 29 CCS

I need some help making sense of my prop situation. Boat is a 2017 29' Sunsation CCX with 200 Mercury Verado's (4 cyl). Boat came from the factory with Mirage Plus 23P props. When I purchased the boat it had 21P Revolution 4 blades. The information below is from the previous owner for the Rev's and the factory for the Mirage 23's. For the Rev 4's its pretty much what i experienced, I was able to get a few more mph out of it vs. what is stated below on our lake. In salt the speed actually matched what is listed below for the Rev 4's and I was bumping the rev limiter on the starboard engine as it kept tapping 6100rpm.

2.08 gear ratio

Dry Weight 4200 lb. dry

Factory Props: Mirage Plus 23P x 14 5/8

Props Spin Outward – Based on gear case can’t be changed unless a new gear cases are installed

Engines were set at the lowest setting

X Dimension: engine set all the way down

25” Shaft length (X long)

Boat Ran 60 MPH on GPS @ 6000 RPM

30 Gal. of fuel

2 ppl





Current Info

Exiting Props: Rev 4 21P x 14 5/8 – (LH Prop out of balance no other issues 9/30/2021 FJ Propeller)

GPS speeds

54.8MPH @ 6150-6200RPM

44MPH @ 5000 RPM

34.5MPH @ 4000 RPM

30MPH @ 3600 RPM

50 Gal of Fuel

Light chop 3-5Mph wind

2ppl on board (450lb)

I bought a used set of Mirage Plus 23's and tested them today on the bay. Boat was actually slower, 3/4 tank of fuel (108 gals) two people and decent chop I could not turn more than 5100 rpm and about 53 mph. End of the day 1/2 tank of fuel flat water 5100 rpm and 50 mph. Tabs were up and engine trimmed to the point of getting loose them two quick bumps down on the trim. I would have thought I could turn the Mirage 23 higher rpm than the 21P Rev 4. What am I missing here ???
bigredbaja is offline  
Reply
Old 10-06-2024 | 07:26 AM
  #2  
Registered
15 Year Member
 
Joined: Aug 2010
Posts: 2,227
Likes: 547
From: Cape Coral FL
Default

Rob, I have a set of 23 Mirages, not the + if you want to try them.
snapmorgan is offline  
Reply
Old 10-06-2024 | 08:24 AM
  #3  
Thread Starter
Registered
15 Year Member
 
Joined: Jul 2009
Posts: 570
Likes: 32
From: Newburgh, IN/Freeport, FL
Default

Originally Posted by snapmorgan
Rob, I have a set of 23 Mirages, not the + if you want to try them.
Thanks Joe, I bought a set not long after buying the boat. Just had the chance to get them on the boat this week and do some testing. I dont understand why I can turn the 23's more than 510/5200 RPM and match the factory set up. Nothing wrong with the motors, they will hit 6000/6100 with the 21P Rev's.
bigredbaja is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.