Digital to analog converter wiring
09-08-2025 | 08:00 PM
#1
Thread Starter
Registered
Joined: May 2016
Posts: 21
Likes: 0
Digital to analog converter wiring
Hello
I bought a sea core bravo transom, it has a digital position sensor with the 3 wires.
So I bought a converter on eBay. It plugs into the position 3 wire transom plug. It has the 2 wires to the dash gauge and 12v. Keyed 12v purple, blk/white stripe and gnd. But I'm confused about the purple with white stripe and blue with male plugs. See pictures.
Mercury 56-845060A4, Marine Trim Sender Conversion Kit
Please help
Says limit sensor, but I have wires for that.
I bought a sea core bravo transom, it has a digital position sensor with the 3 wires.
So I bought a converter on eBay. It plugs into the position 3 wire transom plug. It has the 2 wires to the dash gauge and 12v. Keyed 12v purple, blk/white stripe and gnd. But I'm confused about the purple with white stripe and blue with male plugs. See pictures.
Mercury 56-845060A4, Marine Trim Sender Conversion Kit
Please help
Says limit sensor, but I have wires for that.
Last edited by Lief; 09-08-2025 at 08:11 PM. Reason: Reported wrong wire colors
