Is there a kit or modified bracket to attached the Bravo 1 shift cable from TSK to go to 33c style control at console end.
I would like to go from tsk cables straight to the shift head.
thanks.

If I am thinking right, you basically need to go from a threaded rod to a ring terminal?

Something like this?
https://www.bow.com/product/seastar-...0-seri-317413/

why? the bracket changes the ratio so the shift lever moves the set distance and it also makes it easier to move. by removing it you would need both the transom cable and the shifter cable to be mounted to something and then connect them but you would make the throw of the shifter shorter and harder to move.

I have re rigged from TRS and gearbox to Bravo 1 XR. So have no shift plates. And my throttles and shift on the boat take 33c style. So I need 2x shift plates to go on the end of the TSK cable. And change to 33c to go to the console.