Plumb Perma-cool Thermostat
04-20-2003 | 09:48 AM
#1
Thread Starter
Registered
Joined: May 2002
Posts: 1,014
Likes: 0
From: Tampabay Florida
Plumb Perma-cool Thermostat
Lost the paperwork on how to plumb my Perma-cool Oil Thermostat. Anybody got a copy of the instructions? I have an idea how it should go , but are not 100% certain
Thanks John
Thanks John
04-20-2003 | 07:18 PM
#2
Charter Member
Joined: Oct 2000
Posts: 1,679
Likes: 1
From: Richmond, VA
Got it right here. The two "C" ports go to the cooler. The two "E" ports are the entry/engine side. Oil leaves your engine, goes through the filter and into the stat in E1. C1 feeds the cooler. C2 is the return from the cooler. And E2 returns to the engine.
__________________
Steve Gresham
'03 Donzi 33ZX
Steve Gresham
'03 Donzi 33ZX
04-20-2003 | 09:58 PM
#3
Thread Starter
Registered
Joined: May 2002
Posts: 1,014
Likes: 0
From: Tampabay Florida
Thanks
Cignificant,
Thanks, eventually I found the instructions. I am installing a HP 500 motor. Also the oil plugs were missing in the oil port next to the filter pad...primed motor to find I had pumped about 4 quarts of oil in my squeeky clean bilge
Thanks for the help.
John
Thanks, eventually I found the instructions. I am installing a HP 500 motor. Also the oil plugs were missing in the oil port next to the filter pad...primed motor to find I had pumped about 4 quarts of oil in my squeeky clean bilge
Thanks for the help.John
