My New 242LS Dash Plates
12-10-2003 | 04:35 AM
#2
Registered
Joined: Dec 2002
Posts: 4,815
Likes: 42
From: 1000 Islands
Is there another color you can play off in the boat, or that is neutral other than doing them black? All that custom work deserves more. Something that's classy and works with the rest of the black dash...silver, pewter (metal, not the GM color) or even airbrush like we're starting to see alot of now. 
12-10-2003 | 10:23 AM
#6
Toxic FORMULA
Joined: May 2002
Posts: 4,238
Likes: 1
From: pitman nj
Passenger side. I made the upper two all one piece. Being black before , you didn't notice the seam so much. But in white I thought it would look like hell.
Last edited by mopower; 12-10-2003 at 10:27 AM.
12-10-2003 | 09:54 PM
#10
Toxic FORMULA
Joined: May 2002
Posts: 4,238
Likes: 1
From: pitman nj
Blake,
I had them reproduced in sandwiched plastic like the originals. But instead of black outside and white inside they used white/out and black/in. All the original printing and design was CNC'd into the new stuff so it looks like a negative of the original. I added fuel pressure , oil temp and water pressure on both engines
Now GO TO BED , it's a school day tomorow
I had them reproduced in sandwiched plastic like the originals. But instead of black outside and white inside they used white/out and black/in. All the original printing and design was CNC'd into the new stuff so it looks like a negative of the original. I added fuel pressure , oil temp and water pressure on both engines
Now GO TO BED , it's a school day tomorow
Last edited by mopower; 12-10-2003 at 10:00 PM.
