Kamma surface drive
02-02-2004 | 11:21 PM
#1
Guest
Posts: n/a
Kamma surface drive
I have a pair of Kamma surface drives on a Wellcraft cat that I am trying to bring new life to. I need to find a pair of boots that cover the pivot point of the drive, can anyone help me locate them?
Thanks For the reply, Team Archer fixed me up.
Thanks For the reply, Team Archer fixed me up.
Last edited by kdoolady; 02-03-2004 at 06:20 PM.
02-02-2004 | 11:32 PM
#2
speel chekk this fokker!
Joined: Feb 2001
Posts: 5,329
Likes: 1
From: Locust Valley, New York
welcome to the board!!!
as for kaama parts there are bunch of guys here with kaamas. I htink "cuda" just had to get some parts for his.
post in eth general area "looking for kaama parts" prolly get you a decent response
as for kaama parts there are bunch of guys here with kaamas. I htink "cuda" just had to get some parts for his.
post in eth general area "looking for kaama parts" prolly get you a decent response
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
02-03-2004 | 06:51 AM
#3
Banned
Joined: Sep 2001
Posts: 25,191
Likes: 0
From: Deland, Florida
Here is a thread I did with pictures of changing the boot.
boot replacement Read this one too. Oops The boots can be bought at Archer Marine. They are around $300.
boot replacement Read this one too. Oops The boots can be bought at Archer Marine. They are around $300.
Thread
Thread Starter
Forum
Replies
Last Post
thayes11
General Q & A
0
10-02-2005 12:36 PM
