anyone have one? dressing up the old hogs....

Are you looking for braided line or tube?....

Every place I've checked is about 6.00 a foot for #8. Check at hydraulic supply stores. If you don't have one near you up there in the north woods, Jegs and Summit carry it for the same price.

WE USE A HARD LINE THAT WE HAVE MANUFACTURED FOR OUR MARINE ENGINES WHICH HAVE THE CORRECT BENDS FOR PROPER FIT AND ARE SUPPLIED WITH ALL COMP FITTINGS FOR A GOOD TIGHT SEAL . THE FITTINGS ARE ALL HARD ANODIZED, THESE LINES ARE THE NICEST IVE SEEN ANYWHERE IF YOU'D LIKE GIVE ME CALL AND ILL GIVE YOU THE PRICE I JUST NEED TO KNOW IF SINGLE OR DUAL CARB AND IF DOMINATOR OR 4150 GOOD LUCK LAZ MESA 1-305-884-5368 WWW.MESABALANCING.COM

I bought some braided lines from a airplane parts store here in town and it was cheaper than the speed shops.

I'm hitting the hydraulic place here in town tomarrow.

Any local Aeroquip dealers near you (Aeroquip Express)? Make sure you run big enough size line for your H.P. I would say no smaller that -10 to the fuel pump, -8 pump to carb.