Powder Coating tech assist needed
05-04-2004 | 04:02 PM
#1
Thread Starter
Registered
Joined: Nov 2002
Posts: 3,029
Likes: 2
From: Bonita Springs, Florida
Powder Coating tech assist needed
Drives were just powder coated. They were blasted, hand sanded, baked and powder coated. Everything looked great.
Then a UV clear coat was applied and baked again. On the bottom of the drop boxes and a couple other spots the clear blistered.
The drives had not been in the water for five years. What happened?
Then a UV clear coat was applied and baked again. On the bottom of the drop boxes and a couple other spots the clear blistered.
The drives had not been in the water for five years. What happened?
